Matson Performance Group TRC AS-44

Independent Field Service Representative for Texas Refinery Corp. Brand Lubricants

TEXAS REFINERY CORPORATION
High Performance Lubricants \\

**ASPHALT CLEANING SOLVENT**
REMOVES ASPHALT TYPE SOILS FOR SMALL OR LARGE PARTS FOR SOAK TANKS WORKS WITH SUPER BIG RED^® HIGH FLASH POINT HIGH SAFETY FACTOR	ASPHALT CLEANING SOLVENT has 3 to 5 times the solvent action of common solvents like kerosene or mineral spirits.

ASPHALT CLEANING SOLVENT is a light amber liquid with a characteristic solvent odor. It is a combination of organic solvents with excellent cleaning action. In fact, it has three to five times the solvent action of common solvents like kerosene or mineral spirits. It does not contain alkalis, acids, or inert fillers.

Removes Asphalt Type Soils

Designed for the removal of asphalt type soils. It has a highly effective solvent action on oil, grease, and paraffin as well. It can be used in combination with SUPER BIG RED^®.

For Small or Large Parts

For light asphalt based soils, use at room temperature as it comes from the drum. For small parts, use a soak tank operation. For larger parts, brush or flow on the part to be cleaned. Time of removal is dependent on the dept of the soil.

For Soak Tanks

For heavy deposits of asphalt based soils, a soak tank is the best way to clean. Warm the ASPHALT CLEANING SOLVENT in the soak tank to a maximum of 130°F. Care must be taken to hold the temperature to no more than 130°F. to prevent fire hazard. Once again the time for removal of soil depends on the type and dept of the soil.

Works with SUPER BIG RED^®

This product can be used as the solvent portion in a solvent emulsifier system. Use a ratio of one part SUPER BIG RED^® to five parts ASPHALT CLEANING SOLVENT all the way up to one part SUPER BIG RED^®to ten parts ASPHALT CLEANING SOLVENT. The ratio depends on the type and depth of soil to be removed.

High Flash Point

Has a high flash point of 150° F. This makes it much safer than mineral spirit type solvents which flash at 130°F.

High Safety Factor

Contains no chlorinated solvents, eliminating toxic fumes from chlorine compounds. When used with adequate ventilation, has high safety factor to personnel.

Specifications

ASPHALT CLEANING SOLVENT

Product Code #1040

Gravity, API at 60°F., Max.	19.5
Distillation, °F. Initial Boiling point, Min. E P, Max.	360 (182°C.) 410 (210°C.)
Color, ASTM, Max	6
Aromatics, Vol. %, Min.	98
Kauri Butanol Value	95
Mixed Analine Point, °F., Min.	59°F. (15°C.)
Flash Point, °F., COC, Min.	150°F. (66°C.)
Appearance	Clear, No Free Suspended Matter

Do not use ASPHALT CLEANING SOLVENT on acrylic automotive finishes.

Handling Information: For safe handling, see Material Safety Data Sheet (MSDS).

"There is a principle which is a bar against all information, which is a proof against all argument, and which cannot fail to keep a man in everlasting ignorance. That principle is condemnation before investigation."

- HERBERT SPENCER

April 27, 1820 – December 8, 1903

Independent Field Service Representative for Texas Refinery Corp. Brand Lubricants

TEXAS REFINERY CORPORATION

Green Since 1922