|
Texas Refinery Corp.'s
AIR-COOLED TWO CYCLE ENGINE OIL
is a significant improvement over
the ordinary oils on the market. The oils themselves
have been put through special refining steps and then
special additives have been included that specifically
address the requirements of air-cooled two cycle
gasoline engines. |
Special
Added Synthetics
Special
synthetics are added to increase
AIR-COOLED TWO CYCLE ENGINE Oil'
film thickness, viscosity and thermal stability. These
synthetics prevent engine deposits, ring sticking, chemical
wear, and varnish formation. Newer air-cooled engines run at
higher rpm's creating more heat and pressure, thus another
reason for synthetic additives. Also, replacing some of the oil
with synthetics lessens the chance of equipment smoking when
properly mixed with gasoline.
Reduces
Smoking
The use
of two cycle gasoline engines for air-cooled operations (chain
saws, generator sets, motorcycles) has grown dramatically. These
types of engines are ideally suited to these applications
because of their light weight, relatively low cost and ease of
maintenance. The air-cooled engines that burn a combination of
gasoline and oil are particularly useful under low temperature
operating conditions because they eliminate the cooling system
problems inherent to liquid-cooled engines at freezing
temperatures.
Increased
Oil Film Thickness
A
special additive has been used to provide better cylinder
lubricity. This reduces piston scuffing especially at the higher
temperatures that the air-cooled engine runs.
Increased
Viscosity
The
blend of additives in high quality base stocks gives us
increased viscosity. This gives improved film strength and less
wear on the moving parts.
Increased
Thermal Stability
A
different detergent package has been used in Texas Refinery
Corp.'s AIR-COOLED TWO CYCLE ENGINE
OIL. This gives better high
temperature performance and much improved cleanliness of the
engine.
Mixes
Easily
Since
the lubricating system has an increased viscosity, mixing into
the fuel became a problem in cold weather.
AIR-COOLED TWO CYCLE ENGINE OIL
special formulation allows for improved mix ability of the fuel.
Texas
Refinery Corp.'s AIR-COOLED TWO
CYCLE ENGINE OIL may also be used
in units where the oil is injected into the gasoline from a
separate compartment as well as those units where the oil and
gas is pre-mixed. It mixes well with gasoline to prevent
stratification where too much oil may be at the bottom of the
tank and not enough at the higher levels. Proper mixing will
prevent the burning of a rich mixture at the bottom of the tank
or burning a lean mixture at the top of the tank that can lead
to lack of lubrication. Texas Refinery Corp.'s product will help
eliminate those mixing difficulties especially those that are
greatly aggravated by cold weather.
CAUTION: Do not use Texas Refinery Corp.'s
AIR-COOLED TWO CYCLE ENGINE OIL
in marine two cycle gasoline engines. |
®