|
BAND SAW KLEENKOOL
is a premium quality oil specially formulated for the
unique problems associated with high speed band saws.
BAND SAW KLEENKOOL is engineered to lubricate, cool and
clean residue from band saw blades. |
Friction
Modifiers
Contains fortified friction modifiers. High speed band saws
operate in very abrasive conditions. The impurities found in
lumber and the conditions around lumber mills create a very
destructive environment for high speed band saws. Its friction
modifiers help combat these abrasive conditions and reduce wear.
Great
Precision Cuts
Makes
it easier to make those precision cuts. This is particularly
important, for at high speed, the effect of severe abrasive
conditions are multiplied. The speed and the abrasiveness of the
products being cut generate a tremendous amount of heat. This
heat can lead to premature band saw failure and imprecise cuts.
These imprecise cuts are costly to any lumber cutting operation.
With the use of
BAND SAW KLEENKOOL OIL there is
less waste lumber and more accurate
cutting. Production time and efficiency is increased under the
severest of conditions.
Keeps
Blades Clean From Sap, Tar and Resin
Sap,
tar and resins found in most types of wood create a tremendous
problem for high speed band saws. As these debris collect on the
band saw surface, the speed of the blade is effected, as well as
the precision of the cuts. The continuing accumulation of these
residues not only slow down production and decrease efficiency,
but lead to down time from broken or damaged saw blades.
Cleans
saw blades and keeps them clean with continued use.
Incorporates special cleaners
that help remove sap, tar and resin. At the same time it helps
prevent deposit of resins on blades during operation.
Reduces
Down Time And Operating Expenses
High
speed band saws are extremely expensive. Therefore, it is
imperative to protect this investment. Through a combination of
superior lubrication, cooling abilities and special cleaning
properties, it promotes extended long life for high speed band
saws. Production is increased while the need for down time to
replace, clean or adjust damaged saws is greatly reduced.
BAND SAW KLEENKOOL
is a must in any profitable saw mill operation.
Superior
Product
Many
try to lubricate high speed band saws with nothing more than
naphthenic oil. While naphthenic oil can provide some natural
solvency, it is a very poor lubricant and does little to remove
deposits from band saw blades. Texas Refinery
Corp.'s
BAND SAW KLEENKOOL OIL
is a superlative formulation of detergents, anti-wear additives,
anti-oxidants, coolants, solvents and lubricants blended with a
high quality hydro-cracked base oil for thermal stability. This
complex formulation does a superior job of lubricating, cooling,
cleaning and extending high speed band saw life.
Easy to
Apply And Economical To Use
Can be
administered by an automatic spray lubricator that will mist or
drip feed it on, or it can be brushed or applied with a hand
sprayer. Has been uniquely formulated to flow or spray easily in
a wide range of temperatures and conditions. It is very
economical to use since a small amount goes a long way and does
multiple jobs so well. The answer to an efficient cutting
operation using high speed band saws is
BAND SAW KLEENKOOL OIL. |
®