| Mixes
exceptionally well with water. By staying mixed it provides the
needed lubrication for moistener pads to wash the spindles
clean. The importance of clean cotton, graded at the gin, cannot
be overemphasized. Provides a lubricant as well as a cleaning
solution for the spindles.
Stays
Mixed
The
ability of COTTON PICKER WATER TANK
OIL to stay mixed in water without
separating is highly important. Staying in solution with the
water makes sure the spindles are flushed clean without rinsing.
Some competitive oils separate in the water tank, plugging
outlets and causing the pads and spindles to run dry. This will
dirty the cotton - - - thereby downgrading it. This can prove
costly to the cotton grower.
Effective
At A 1 To 50 Ratio
In most
cotton picker equipment two percent (1 gal. to 50 gal. water) of
the volume of water should be
COTTON PICKER WATER TANK OIL. This
general recommendation seems to be effective; however, the
equipment manufacturer's specifications should be followed. Fill
the tank half full of water, add the oil, then finish filling
the tank with water, stirring thoroughly to ensure complete
mixing.
Economical Release Agent
There
are many other uses. One of these, in areas where it is
permitted, is a release agent for the beds of trucks hauling
bituminous hot mix. A ratio of one gallon
COTTON PICKER WATER TANK OIL
to fifty gallons of water makes a great mixture to spray on the
dump truck body. The average dump truck only needs three-fourths
of a gallon of treatment. Compare the cost of that treatment
with the cost of diesel fuel or some of the other things used as
release agents and you will see real savings.
For Chain
Lubrication
Another
Application: Used in heavy concentrations of one to five or one
to ten, COTTON PICKER WATER TANK
OIL can lubricate things like
chains in high heat areas with less danger of fire than if a
straight petroleum oil were used.
Versatile
Customers dealing with asphalt have found another use. The
rollers have in past years used diesel fuel fed from a drip tank
to keep the asphalt from sticking to the roller. Unfortunately
the use of diesel fuel has been found to soften the asphalt and
possibly cause chuck holes to appear later. Customers have found
the use of COTTON PICKER WATER TANK
OIL at a ratio of 1 part oil to 50
parts water is an excellent release agent, keeping the roller
free of asphalt. In addition, it prevents rust from appearing in
the storage tank.
As you
can see, COTTON PICKER WATER TANK
OIL is a versatile product with
many different types of uses. You may develop additional uses
for the product by experimenting with this extremely good water
emulsion lubricating oil. |
®