|
Non-foaming wetting agent that
reduces surface tension of water and chemicals. Uniquely
designed for
reticulating
pumps in sprayers and
systems, where foam is a problem.
Also helps reduce and eliminate
foaming of liquids with which it is mixed and used. This
means ease of operation, complete coverage and improved
efficiency when HYDRATE
PLUS NF is your surfactant
of choice.
Surface tension is a basic characteristic of liquids.
When describing the tension of water it is referred to
as "dynes per centimeter". Water has a tension of 72
dynes per centimeter. Will disrupt the molecular bond of
water drastically lowering the d.p.c., thus forcing the
bead of water to break down, sheet and penetrate. The
same holds true when mixed with other liquids . . .
herbicides, fertilizers, pesticides, etc. It allows
chemicals such as herbicides and pesticides to absorb
into the intended destination quickly with minimal
beading and "roll off" with virtually no evaporation. |
For Herbicides, Insecticides and Fungicides
Provides a tremendous advantage to the Agricultural and Farming
Industry. Applicators face certain problems such as beading, run
off and evaporation. All of these factors mean that the chemical
is not able to effectively do it's job. Certain plants have waxy
leaves, thus complicating the chemical mixtures ability to
penetrate. Many insecticides are contact killers with little or
no residual so direct exposure is a must.
HYDRATE PLUS NF
will break the bead of tension for uniform application and quick
penetration. It will stay on plants even with the waxiest of
leaves. Most pesticides are water resistant. Allows pesticides
and water to mix thoroughly while suspending the chemical in
water. No separation means a good mix is being applied. This
means your most effective and efficient application occurs when
you are using HYDRATE PLUS NF.
*Please follow manufacturers recommended mix ratios when mixing
chemicals.
Non-Ionic
Not affected by the chemical bond between two oppositely charged
ions. In other words, chemicals such as pesticides will not
break down by positively charged or negatively charged atoms. A
positive or negative charge can change the properties of certain
chemicals, thus your application is ineffective. Offers a
neutral mixture that ensures you the chemicals and water are
able to work in tandem to provide a uniform application.
Non-Corrosive
This
surfactant will not harm or wear equipment. It will actually
benefit spray equipment by reducing salt and mineral deposits on
spray nozzles. Will aid in the cleaning of nozzles and spray
heads every time it is used.
No
special storage is required. This means no special storage and
holding tanks are necessary. Also transport need not be a
concern because it's non-corrosive properties allow this product
to be as mobile as necessary.
Safe to use
Safe for the application and the applicator. Has a pH level of
9-11.5. Any application safe for the use of water is safe for
HYDRATE PLUS NF.
One key factor is the safety of the applicator. No special
safety equipment is required, but safety measures should be
taken when mixed with chemicals.
The
product is designed for deciduous trees, edible crops and other
vegetation and grasses. It is a biodegradable product that is
non-toxic and earth friendly.
Designed for all Industries
Farming and Agriculture both benefit from
HYDRATE PLUS NF
by allowing chemicals and water to work better on crops and
trees.
Firefighters will capture fires more effectively by penetrating
the fire quickly thus extinguishing the flames. Much less smoke
and toxic gases will be experienced as a result.
Water
puddles can be dispersed to allow absorption of water on golf
fairways, walkways and roads. Ranchers will benefit when washing
and spraying livestock. When mixed with water, this product will
penetrate the coarse hairs on animals for cleaning and cooling
the animals on hot days.
Superior wetting agent that serves many functions such as a
penetrant, a dispersant and a rinse aid. It is designed for
maximum effect. A little HYDRATE
PLUS NF in the rinse of a car wash
allows for quick sheeting of the water to help drying time and
reduce water spotting.
Super Concentrated
Highly concentrated surfactant that greatly reduces the quantity
of chemical needed for application. This means less usage of
HYDRATE PLUS NF
compared to crop oils while achieving better results.
When mixing with other products,
HYDRATE PLUS NF
should be the last ingredient to be added to the final solution.
Average recommendations for mixing - * mixing ratio may vary
depending on product or products mixed*
| |
100 gallons final mixture |
Ratio |
|
Fertilizing |
½ - 2 pints
|
1:1600 to
1:400 |
| Road
Compaction |
1 - 2
pints |
1:800 to
1:400 |
|
Other Products |
1 - 3 pints
|
1:800 to
1:270 |
| Fire
Fighting |
½ - 2 pints
|
1:1600 to
1:400 |
|
®