| Most
chain drives fail from inadequate lubrication.
Unfortunately, some seem to think a chain lubricant does
not need to be a good lubricant. In fact, some even
utilize used motor oils. However, tests indicate used
motor oil is worse than no lubrication at all. Used
motor oil carries with it dirt, contamination and
corrosive acids that can spell premature death to a
chain. |
Contains
Quality Oils and Additives
Texas
Refinery Corp.'s MOLY CHAIN OIL
is an unusually high quality item. It is made from 95-VI base
oils plus quality additives and dry film lubricant molybdenum
disulfide (moly). The 95-VI paraffin base oils are very
resistant to temperature change, thus making MOLY CHAIN OIL a
very stable lubricant. MOLY CHAIN
OILS are also authorized by the
U.S. Department of Agriculture as H2 lubricants which have no
contact with food.
Contains
Molybdenum Disulfide
The
molybdenum disulfide penetrates to prevent undue wear of pins,
bushings and link plates. The solid film lubricant, molybdenum
disulfide, is well-known for its ability to prevent wear,
friction, and metal-to-metal contact. Molybdenum disulfide is
twice as slippery as graphite and forms a bond with metal to be
an excellent lubricant even if the oil is temporarily squeezed
out under pressure.
Helps
Prevent Rust
It
contains superior rust inhibitors to protect the metal's
surface. In addition, the oil's clinging tendency keeps a
thicker oil film on the metal which in turn, helps maintain the
additives in contact with the metal surface for protection.
Comes in
Five Weights
A chain
is a machine consisting of hundred, even thousands of moving
parts. As is true of any machine, these parts require protection
from friction and detrimental conditions. For the ultimate in
chain lubrication, choose Texas Refinery Corp.'s
MOLY CHAIN OIL
in the proper viscosity for your application.
Easy To
Apply
There
are all kinds of ways for MOLY
CHAIN OIL to be applied. Sometimes
it is applied by hand with a brush or sprayer; other times it is
applied by an automatic system, which can be a drip fed or a
force fed system. There is also the reservoir or bath-type
lubrication.
Versatile
Texas
Refinery Corp.'s MOLY CHAIN OIL
handles a wide variety of jobs. It will flush away any foreign
material or metal wear debris, prevent rust or corrosion of the
chain components, remove heat caused by friction, and prevent
wear through good oil film strength and molybdenum disulfide as
well as superior anti-wear additives. In addition, it will
lubricate sprocket contact surfaces, bushing pins, and link
plates.
There
are many other applications for
MOLY CHAIN OIL. Some of these can
include general plant lubricants, wire rope or cable lubricants,
as well as handling gear boxes (non-EP). |
®