  |
|
Home |
Introduction |
Products
|
Warranty
|
Lab
Oil Analysis |
Info |
Tech Tips
|
Service Locations
|
Contact
|
|
|
|
Independent Field Service
Representative for Texas Refinery Corp. Brand Lubricants
|
TEXAS
REFINERY CORPORATION
High Performance Lubricants
PRO-TAC IV
-
EXCEEDS TO-4 & C-4
-
PROVIDES LOW TEMP
FLUIDITY
-
PROVIDES LONGER DRAIN
INTERVALS
-
PROVIDES BETTER
PERFORMANCE
-
ELIMINATES PROBLEMS
-
CONTAINS OUTSTANDING
ADDITIVES
|
PRO-TAC IV has passed
the requirements for Allison C-4 transmission fluids and the
Caterpillar TO-4 specifications. |
|
Exceeds
TO-4 & C-4
Texas
Refinery Corp.'s PRO-TAC IV
is a superior product due to refining techniques of the base
oils as well as the use of additives that exceed the
requirements of Caterpillar TO-4 and Allison C-4. The base oils
have been put through several refining steps that remove
undesirable characteristics while, at the same time, making
these oils extremely resistant to oxidation or to the
possibility of contributing to sludge, gum or varnish. Exceeds
the requirements of today's power shift transmissions, wet disc
brakes, and final drives that have become more complex and use
more advanced materials.
Low Temp Fluidity
Offers excellent low temperature fluidity. Choose the proper
viscosity depending on temperature conditions and you'll find
this product provides easier cold weather starting and better
wear protection during cold weather operation.
PRO-TAC IV
exceeds the wear requirements of Caterpillar TO-4. Can be used
in Allison transmissions and Caterpillar applications where they
previously used a CD/TO-2 motor oil. Many types of equipment
have specified CD/TO-2 type oils and
PRO-TAC IV
can take care of all of them with the exception of the engine
application.
Longer Drain Intervals
Provides longer drain intervals and more reliable equipment
operation than commercial products on the market. The product
has excellent oxidation stability and sludge control as
demonstrated in the Allison C-4 oxidation test.
The red
color of PRO-TAC IV
works in two ways. First, a leak can easily be traced. Second,
it helps prevent someone from putting this product in the engine
crankcase.
Better Performance
Please remember the Allison C-4 and Caterpillar TO-4
requirements are simply the minimum test Texas Refinery Corp.'s
PRO-TAC IV
must satisfy to meet the performance requirements of heavy
equipment. The use of this product will not attack non-metallic
materials - - - therefore friction discs in transmissions and
brakes will last longer. Some oils can have a detrimental effect
on both the performance and life of drive train components. With
PRO-TAC IV
gear wear will be greatly reduced. Instead of "stick/slip"
vibration and noise problems experienced with common oils it
will let the wet disc brakes perform smoother, quieter, and last
longer.
Eliminates Problems
Been tested with both metallic and non-metallic friction
materials and provides stable friction characteristics.
Eliminates the problems of excessive brake noise, embrittlement
of elastomeric materials and has eliminated the weakening of the
binder in paper materials. With Texas Refinery Corp.'s
PRO-TAC IV
there is no need to constantly adjust equipment to maintain
proper clutch setting. This product helps eliminate clutch
slippage, even under heavy loads on steep inclines.
Contains Outstanding Additives
Contains outstanding anti-corrosion, anti-oxidation and
anti-rust additives. These additives are important for long term
protection of the equipment. In addition special anti-foam
protection is provided to ensure that metal-to-metal contact and
resulting wear is kept to an absolute minimum. |
Print
|
TEXAS
REFINERY CORPORATION
High Performance Lubricants
Specifications
PRO-TAC IV
Formulated to Meet Allison C-4, Caterpillar TO-4 and API CF and CF-2
Specifications
TYPICAL TESTS
|
SAE Grade |
SAE 10
|
SAE 30 |
SAE 50
|
| Product Code # |
6765
|
6767
|
6769
|
| API Gravity |
29.0
|
27.0
|
26.1
|
| Specific
Gravity |
0.8816
|
0.8927
|
0.8978
|
| Weight per
Gal., Lbs. |
7.341
|
7.434
|
7.476
|
| Flash Point,
°F. (°C.) |
420
(215) |
460
(238) |
460
(238) |
| Fire Point, °F.
(°C.) |
455
(235) |
510
(265) |
500+
(260+) |
| Pour Point, °F.
(°C.) |
-32
(-36) |
-22
(-30) |
-0.5
(-18) |
| Viscosity, SUS
at 100°F. |
207
|
550
|
1080
|
| Viscosity, SUS
at 210°F. |
47.6
|
66.1
|
91.8
|
| Viscosity,
40°C. cSt 118.77 226 |
43.86
|
118.77
|
226
|
| Viscosity,
100°C. cSt |
6.48
|
11.9
|
18.21
|
| Viscosity
Index |
106.1
|
96.6
|
96.5
|
| Copper
Strip Corrosion,
(2 Hrs. @ 100°C.)
|
1A
|
1A
|
1A
|
| Fluid
Compatibility |
Pass
|
Pass
|
Pass
|
| Homogenity |
Pass
|
Pass
|
Pass
|
| Foam Test |
0/0
|
0/0
|
0/0
|
| TO-4
Fluroelastomer Seal Test |
Pass
|
Pass
|
Pass
|
| FZG Gear Wear |
Pass
|
Pass
|
Pass
|
| Vickers Pump
Test |
Pass
|
NR*
|
NR*
|
| C-4 THOT |
Pass
|
Pass
|
Pass
|
| VC 70 Friction
Test |
Pass
|
Pass
|
Pass
|
| Brookfield
Viscosity, cps |
86,00 @
-35°C. |
134,000
@ -25°C. |
135,000
@ 75°C. |
| Pump ability |
9300 @
-25°C. |
8900 @
-15°C. |
13,700
@ -10°C. |
| High
Temperature High Shear at 150°C. |
2.22
|
3.42
|
5.0
|
| Calcium, Wt. % |
0.31
|
0.31
|
0.31
|
| Zinc, Wt. % |
0.12
|
0.12
|
0.12
|
| Phosphorus, Wt.
% |
0.11
|
0.11
|
0.11
|
| Color |
Red
|
Red
|
Red
|
| Allison C-4
Approval |
C4-24292896 |
C4-24302896 |
---
|
*Not Run
Print
|
|
|
|
 |
|
"There is
a principle which is a bar against all information, which is a proof
against all argument, and which cannot fail to keep a man in everlasting
ignorance. That principle is condemnation before investigation."
- HERBERT SPENCER
April
27, 1820 – December 8, 1903
|
 ®
Independent Field Service
Representative for Texas Refinery Corp. Brand Lubricants |
|
TEXAS
REFINERY CORPORATION |
|
High Performance Lubricants |
|
Green
Since 1922 |
|
|
