| Due to its exclusive
formula of tiny fibers suspended in a complex liquid
solution, TIRESEAL® can
help reduce up to 50% or more of all flats caused by
punctures in the tread area and leaks in the rim or bead
areas . . . providing equipment with increased
efficiency and production! |
Reduces Downtime
When used as a
preventive maintenance product, it can help reduce cost and
inconvenience normally experienced when a flat occurs. When
protected with this product, a piece of equipment and the
operator continue to earn their keep instead of sitting idle,
waiting for a tire to be repaired . . . the cost of which can be
extraordinary. Not only is this particular piece of equipment
still doing its job, but crews and equipment following are not
delayed either.
Won't Harm Tires or Rims
Chemically inert; that
is, it is inactive. There is nothing to attack or damage any
part of the tire. It does not contain petroleum solvents or
other compounds that could prove harmful. As a matter of fact,
it actually extends a tire's life
by absorbing the heat caused by friction in the tread area,
holding the heat in its liquid solution and transferring this
heat to other parts of the tire. Also, it helps rejuvenate the
rubber in a tire, and keep it pliable, extending the tire's
life.
Many tires have been
destroyed when the rim welded itself to the tire, due to rust
and heat. With TIRESEAL®, this
problem is virtually eliminated. The liquid solution contains
rust inhibitors, which help keep the rim from rusting and
welding to the tire. TIRESEAL® contains no ingredients that may
pit or corrode metal rims.
Safe and Easy To Use
Been specially
formulated to have no annoying fumes or vapors and is not
harmful to the skin. It can be easily washed off skin and out of
clothing.
To install, rotate the tire
to where the valve stem is between the ten o'clock and the two
o'clock position. Remove the valve core and allow the air to
escape. Pump in the appropriate amount of product - then replace
the valve core and air the tire up to the proper pressure.
TIRESEAL® is now ready to perform!
Can be left in tires for an
almost unlimited time. Unlike some tire sealants, it is not a
"quick-fix" designed to simply get you down the road, then be
washed out once the puncture is properly repaired. Stops leaks
by actually forming a plug, eliminating the loss of air from the
tire. There is no immediate need to have the flat fixed . . . as
a matter of fact, you probably won't even know it occurred!
Contains Anti-freeze
Extreme weather
conditions do not affect its performance. The complex liquid
solution contains a very effective anti-freeze, which has been
specially designed to alter the formation of ice crystals in
TIRESEAL® at subfreezing
temperatures. Naturally, as the temperature drops, the viscosity
of this product will become heavier than usual. However, after
the first few rolls of the tire,it returns to its normal
consistency.
Water Dispersible
If for some reason a
tire should need to be dismounted,
TIRESEAL® can be easily and simply washed out of the tire
with normal water. No special solvents or cleaners are required
to completely remove it from the inside of a tire.
For Off-Road Tires
The uses of
TIRESEAL® are
as varied as the many different types of equipment to be found,
from the largest of earth-moving equipment tires, to farm
tractor tires and even golf cart tires. Its intended for use in
slow moving, off-road tires. This product is not to be used in
tires which are installed on vehicles utilized for over-the-road
service at speeds exceeding 45 miles per hour. Any product
inside a tire could cause an imbalance problem at high speeds.
Also, the sealing ability of this product could be impaired by
high speeds. Speed will create a centrifuge effect, which could
hinder the sealing ability in a tire.
TIRESEAL® is not a cure-all.
However, it has been thoroughly field tested for years by many
satisfied Customers of Texas Refinery Corp. When used as a
preventative maintenance product, it can allow equipment to
perform more efficiently than ever before! |
®