|
SYNTEX 2000
is made specifically with Spicer (Dana), Fuller (Eaton)
and Rockwell manual transmissions in mind. It is just
the right viscosity for Fuller and Spicer manual
transmissions calling for motor oil or mineral oil gear
lubes and the newer specs calling for synthetic
transmission lubes. SYNTEX
2000 is an SAE 50 as called
for in several transmission applications. It is the
perfect weight and has outstanding cold weather
properties for all season performance. |
Made From
Synthetic Base Stocks
Made
from synthetic base stocks allowing an extremely low pour point
- - - which means increased lubricant flow at cold temperatures.
A pour point of at least -40° F. and a flash point of 455° F.
means SYNTEX 2000
is an excellent all-climate, year-round type product.
Cold
Weather Capabilities
The
cold weather capabilities allow easier gear shifting, less drag,
better fuel economy, and less gear wear because vital
transmission parts are lubricated quickly. Sub-zero fluid flow
means vital transmission ports are lubricated quickly.
Highly
Stable
In
addition, when SYNTEX 2000
is exposed to severe heat, oxidation, and sheer conditions, the
product is highly stable. It provides exceptional high
temperature lubrication for extended drain intervals. The
superior all-season lubricating properties mean extended drain
intervals and the virtual elimination of the need to change
fluids due to weather conditions.
Commonly
Used In Fuller And Spicer Transmissions
Commonly used in Fuller and Spicer transmissions in place of
motor oils or mineral transmission lubricants. The synthetic
formulation protects better than straight mineral oil or motor
oil both in high heat and cold temperatures.
SYNTEX 2000
is approved for extended warranties.
Excellent
Additives
Heavily
treated with excellent additives. Anti-rust, anti-corrosion,
anti-foam, anti-oxidation, and anti-wear chemistry coupled with
superior synthetic base stocks make this product a super
performer under extreme conditions of heat, cold, and everything
in between. It provides superior protection to synchronizers,
bearings, and gears. The additives promote longer transmission
and lubricant life as well as reduce component wear.
Compatible With Oil Seals
SYNTEX
2000 is very compatible with oil
seals. It is not detrimental to the seal materials. The
synthetic base stocks do not form deposits on the seals. Many
petroleum products leave deposits on seals. Deposits around the
seal can cause elastomer losses which result in premature
leakage. |
®