|
SYNTEX 2700
comes in two weights. The first is an SAE 75W/90 and the
second is SAE 80W/140. The synthetic base stock has a
very low pour point plus a high viscosity index. As a
result these heavy duty extreme pressure gear lubricants
offer superior low temperature performance as well as
providing increased gear life due to extremely high film
strength. When SAE 75W/90 is used in manual
transmissions, shifting gears in sub-zero weather is
much easier. If gears are heavily loaded, take a look at
the 85 pound Timken OK Load for the SAE 80W/140. |
Has
Extended Drain-Interval Capabilities
Has
extended drain-interval capabilities, as opposed to
petroleum-type gear lubricants. Since
SYNTEX 2700
is treated with additives to prevent and control oxidation,
rust, corrosion, and wear the gear components receive longer
life and reduced wear. This means longer gear life and longer
lubricant life. The high and low temperature performances of
these products exceed those of conventional SAE 80W/90 and SAE
90 hypoid gear lubricants.
Good
Demulsibility
Has
good demulsibility to promote rapid separation of water. The
water usually comes from condensation caused by temperature
variations in the gear boxes. There is no way to prevent
moisture from entering but Texas Refinery Corp.'s
SYNTEX 2700
promotes separation from the water.
Withstands Heat
Stands
heat better than most petroleum oils. This means the need for
make-up oil is less with SYNTEX
2700 compared to most straight
petroleum gear lubricants. If gears "freeze up" because of
cooked gear lube from high operating temperatures,
SYNTEX 2700
can help eliminate the problem.
Made From
Synthetic Base Stocks
Made
from synthetic base stocks giving it extremely low pour points
and channel points. The product is used in all kinds of heavy
duty equipment both on and off-road.
SYNTEX 2700
is also used in many industrial applications particularly where
either cold temperatures or hot temperatures make petroleum
products unsatisfactory.
Ensures
Lubrication Flow
Ensures
lubrication flow to pinion bearings, differential channels, and
upper gears. The ability to protect gears and bearings in a wide
range of loads, speeds, and temperatures make this product
extremely useful.
SYNTEX
2700 is heavily loaded with high
performance chemistry. Anti-rust, anti-corrosion, anti-foam,
anti-oxidation, and extreme pressure anti-wear additives are all
present in higher quantities than in conventional GL-5 petroleum
gear lubricants.
Resists
Foaming
Fights a
common problem (foaming) by using superior anti-foam additives.
In addition, it contains more anti-foam chemistry than
conventional GL-5 petroleum gear lubricants. Foaming allows
metal to metal contact, heat build-up, and eventually gear box
failure. Eliminates ordinary foaming problems and reduces
foaming in the toughest applications or situations. |
®