|
Due to its exclusive formula of
tiny fibers suspended in a complex liquid solution,
TIRESEAL®
can help reduce up to 50% or more of all flats caused by
punctures in the tread area and leaks in the rim or bead
areas . . . providing equipment with increased
efficiency and production! |
Reduces Downtime
When used as a preventive maintenance product, it can help
reduce cost and inconvenience normally experienced when a flat
occurs. When protected with this product, a piece of equipment
and the operator continue to earn their keep instead of sitting
idle, waiting for a tire to be repaired . . . the cost of which
can be extraordinary. Not only is this particular piece of
equipment still doing its job, but crews and equipment following
are not delayed either.
Won't Harm Tires or Rims
Chemically inert; that is, it is inactive. There is nothing to
attack or damage any part of the tire. It does not contain
petroleum solvents or other compounds that could prove harmful.
As a matter of fact, it actually extends a tire's life by
absorbing the heat caused by friction in the tread area, holding
the heat in its liquid solution and transferring this heat to
other parts of the tire. Also, it helps rejuvenate the rubber in
a tire, and keep it pliable, extending the tire's life.
Many
tires have been destroyed when the rim welded itself to the
tire, due to rust and heat. With
TIRESEAL®, this problem is
virtually eliminated. The liquid solution contains rust
inhibitors, which help keep the rim from rusting and welding to
the tire. TIRESEAL® contains no ingredients that may pit or
corrode metal rims.
Safe and Easy To Use
Been specially formulated to have no annoying fumes or vapors
and is not harmful to the skin. It can be easily washed off skin
and out of clothing.
To
install, rotate the tire to where the valve stem is between the
ten o'clock and the two o'clock position. Remove the valve core
and allow the air to escape. Pump in the appropriate amount of
product - then replace the valve core and air the tire up to the
proper pressure. TIRESEAL®
is now ready to perform!
Can be
left in tires for an almost unlimited time. Unlike some tire
sealants, it is not a "quick-fix" designed to simply get you
down the road, then be washed out once the puncture is properly
repaired. Stops leaks by actually forming a plug, eliminating
the loss of air from the tire. There is no immediate need to
have the flat fixed . . . as a matter of fact, you probably
won't even know it occurred!
Contains Anti-freeze
Extreme weather conditions do not affect its performance. The
complex liquid solution contains a very effective anti-freeze,
which has been specially designed to alter the formation of ice
crystals in TIRESEAL®
at subfreezing temperatures. Naturally, as the temperature
drops, the viscosity of this product will become heavier than
usual. However, after the first few rolls of the tire,it returns
to its normal consistency.
Water Dispersible
If for some reason a tire should need to be dismounted,
TIRESEAL® can
be easily and simply washed out of the tire with normal water.
No special solvents or cleaners are required to completely
remove it from the inside of a tire.
For Off-Road Tires
The uses of TIRESEAL®
are as varied as the many different types of equipment to be
found, from the largest of earth-moving equipment tires, to farm
tractor tires and even golf cart tires. Its intended for use in
slow moving, off-road tires. This product is not to be used in
tires which are installed on vehicles utilized for over-the-road
service at speeds exceeding 45 miles per hour. Any product
inside a tire could cause an imbalance problem at high speeds.
Also, the sealing ability of this product could be impaired by
high speeds. Speed will create a centrifuge effect, which could
hinder the sealing ability in a tire.
TIRESEAL® is not a cure-all.
However, it has been thoroughly field tested for years by many
satisfied Customers of Texas Refinery Corp. When used as a
preventative maintenance product, it can allow equipment to
perform more efficiently than ever before! |
®